Our Journey: Passion, Expertise, and Dedication to Excellence
Integrity Garage Floors brings you the best of every color and finish available to make your floors come to life.
Learn more about our Chip Floors, Solid Floors & Metallic Floor Finishes for residential and commercial floor applications.
Chip Floors are the most popular. They are tough, beautiful, easy to clean, hide dirt, resistant to most chemicals and last a long, long time.
Prep: We grind about 1/32nd of an inch off the entire floor. This opens up the pours of the concrete and adds little bumps to it that we call “profile”. This lets our Epoxy Primer seep down into the concrete before it hardens and the profile also gives it something to stick too. Never accept acid etching as a way to prep concrete, it just doesn’t work.
Crack Repair: We repair all of the cracks in concrete with an epoxy- based crack repair.
Primer: We use an Epoxy Water Vapor Barrier to prime the concrete once it is prepped. This is a two-part epoxy that works well in the presence of water vapor. Concrete can be full of moisture and unfortunately some companies use coatings that are only designed for dry concrete. World class glues are made from Epoxy for good reason. They are sticky! Our coatings from South Fork Concrete Coatings are designed to work in tough conditions, they go down and stay down!
Chips: While our epoxy primer is still wet we broadcast chips of paint into it. These are little chips of paint that are made for this purpose. We broadcast them to refusal. In other words, we put on more chips of paint than the epoxy can hold. We don’t just sprinkle a few on. This gives the floor its color. When the epoxy is dry we diligently scrape it in three directions giving the floor the proper profile for the top coat. This is a very important step.
Top Coat: We use the highest quality Polyaspartics for the top coat to our chip floors. Not all Polyaspartics are created equal and ours have been lab tested to show that they are the best. Although I don’t expect you to know what a Tabor Test, ASTM # 4060 is you can rest assured that we do and this test has shown South Fork Concrete Coatings Polyaspartics to be the toughest on the market. This is a tough, hard, chemical resistant coating.
Our Water Vapor Barrier Epoxies ensure that your coating will not peel up and it will stay down, our paint chips assure that your coating will look beautiful and our Polyaspartic top coat ensures that it will last for a long, long time!
MOST CHIP GARAGE FLOORS ARE COMPLETED IN 1 DAY
Solid color concrete coatings are best suited for SHOPS. They are tough, very easy to clean, have a good working surface and are resistant to most chemicals.
THE PROCESS
Prep: We grind about 1/32nd of an inch off the entire floor. This opens up the pours of the concrete and adds little bumps to it that we call “profile”. This lets our Epoxy Primer seep down into the concrete before it hardens and the profile also gives it something to stick too. Never accept acid etching as a way to prep concrete, it just doesn’t work.
Crack Repair: We repair all of the cracks in concrete with an epoxy- based crack repair.
Primer: After prepping we use an Epoxy Water Vapor Barrier to prime the concrete. This is a two-part epoxy that works well in the presence of water vapor. Concrete can be full of moisture and unfortunately some companies use coatings that are only designed for dry concrete. World class glues are made from Epoxy for good reason. They are sticky! Our coatings from South Fork Concrete Coatings are designed to work in tough conditions, they go down and stay down!
Top Coat: We use a Urethane top coat that matches the color of the prime coat. These Urethane Coatings are designed to be tough, real tough. There is a 200-mesh grit in the top coat that is the same stuff they use on aircraft carriers. You can work on it, you can spill on it, you can clean it and it will take good care of your shop for many, many years.
MOST SOLID GARAGE FLOORS ARE COMPLETED IN 1 DAY
Metallix Floors are the wild and the wonderful. They incorporate a marbled 3d look that is awesome. When someone wants a garage, interior room or retail store that is truly unique this is the floor for you.
THE PROCESS
Prep: We grind about 1/32nd of an inch off the entire floor. This opens up the pours of the concrete and adds little bumps to it that we call “profile”. This lets our Epoxy Primer seep down into the concrete before it hardens and the profile also gives it something to stick too. Never accept acid etching as a way to prep concrete, it just doesn’t work.
Crack Repair: We repair all of the cracks in concrete with an epoxy- based crack repair.
Primer: We use an Epoxy Water Vapor Barrier to prime the concrete once it is prepped. This is a two-part epoxy that works well in the presence of water vapor. Concrete can be full of moisture and unfortunately some companies use coatings that are only designed for dry concrete. World class glues are made from Epoxy for good reason. They are sticky! Our coatings from South Fork Concrete Coatings are designed to work in tough conditions, they go down and stay down!
Decorative Coat: This is where the magic happens. We typically use two colors although single color floors look fantastic as well. It is an epoxy coat and it goes down very thick, giving you a one of a kind floor that will be unique to your home or business.
Top Coat: We use a clear Urethane top coat over the Decorative Coat. These Urethane Coatings are designed to be tough, real tough. There is a 200-mesh grit in the top coat that is the same stuff they use on aircraft carriers. You can walk on it, you can drive on it, you can work on it, you can spill on it, you can clean it and it will take good care of your garage, room or business for many, many years.
MOST Metallic FLOORS ARE COMPLETED IN 3 DAYs
Dive into the experiences of our clients as they share their journey with Integrity Garage Floors. Discover how our surface solutions have not only met but exceeded their expectations, leaving a lasting impression on both residential and commercial projects.
Integrity Garage Floors Was Born Of A Deep Desire To Coat Concrete Floors. That Is Our Passion, And We Bring It To You Like No One Else.